Plastiki thermoforming sɛgɛsɛgɛli ka bɔ suguyaw, fɛɛrɛw ani minɛnw na minnu bɛ tali kɛ o la

Plastiki thermoforming sɛgɛsɛgɛli ka bɔ suguyaw, fɛɛrɛw ani minɛnw na minnu bɛ tali kɛ o la

Plastiki thermoforming (sɛnɛfɛnw sɛnɛcogo). fɛɛrɛbɔ, n’o ye fɛn dilanni taabolo nafama ye, o jɔyɔrɔ ka bon bi izini siratigɛ la. K’a ta fɛn dilanni fɛɛrɛ nɔgɔmanw na ka se bi fɛn caman dilanni ma, Plastic Thermoforming Machine ye suguya caman ni baarakɛcogo caman ɲɛfɔ. Nin barokun in bɛ sɛgɛsɛgɛli kɛ thermoforming fɛɛrɛbɔcogo danfara, a dilanni fɛɛrɛw ani a minɛn minnu bɛ tali kɛ o la, k’a laɲini ka kalanbagaw jira ni kunnafoni bɛɛ ye ani min jɛlen don.

I. Thermoforming suguyaw
Thermoforming Machine ye ka plastiki sɛbɛnw sumaya ani k’u cogoya kɛ mɔbiliw kan ni degun walima fɛnɲɛnamafagalan fanga ye walasa ka fɛn kɛrɛnkɛrɛnnenw dilan. Nin ye thermoforming suguya damadɔ ye minnu bɛ kɛ tuma caman na:

1. Fɛnɲɛnɛma finmanw thermoforming (sɔgɔsɔgɔninjɛ) :

Nin ye suguya ye min ka ca kosɛbɛ, a bɛnnen don fɛn suguya caman dilanni ma i n’a fɔ pakew, sanubɔlanw, ani datugulanw ni finimugu finmanw ye minnu janya tɛ tɛmɛ milimɛtɛrɛ 1,5 kan.

2. Furakɛcogo min bɛ kɛ ni thermoforming ye, o ye sɛbɛnfura belebelebaw ye:

A ni thin-gauge tɛ kelen ye, nin suguya in bɛ baara kɛ ni fɛnw ye minnu janya bɛ tɛmɛ milimɛtɛrɛ 1,5 kan caman na, ka fɛn barikamaw dilan i n’a fɔ mobili yɔrɔw ani minɛnw sow.

3. Tansiyɔn jiginni : 1.1.

Ka fara baara kɛli kan ni fɛnɲɛnamafagalan ye walasa ka plastiki nɔrɔ mɔbiliw la, degun bɛ kɛ plastiki fan dɔ fɛ walasa ka kunnafoni tigitigiw sɔrɔ ani ka yɔrɔw nɔgɔya, minnu bɛnnen don fɛnw dilanni ma minnu bɛ ɲini kosɛbɛ.

4. Furakɛcogo min bɛ kɛ ni sɛbɛn fila ye:

Ni u ye fiɲɛ pikiri plastiki fila cɛ, u bɛ nɔrɔ fɛn fila sanfɛla la waati kelen na, ka fɛn fila kɛ siɲɛ kelen, nafa bɛ minnu na ka fɛn gɛlɛnw dilan minnu bɛ kɛ fɛn fila ye.

5. Thermoforming (Tɛrmoforming) min bɛ kɛ ka kɔn ka sɔgɔsɔgɔ:

Ka kɔn ka plastiki sɛbɛnw sɔgɔ sani u ka kɛ thermoforming ye, o bɛ a to fɛnw janya bɛ kɛ kelen ye, kɛrɛnkɛrɛnnenya la, u bɛnnen don fɛnw ma minnu jalen don kosɛbɛ, o bɛ fɛn dilannenw jogo ɲɛ.

II. Forming Fɛɛrɛw

Masina min bɛ thermoformer automatique (otomatiki) kɛ: Ka baara kɛ ni masin fanga ye walasa ka plastiki fɛnw digidigi ka kɛ mɔbiliw ye, minnu bɛnnen don fɛnw ma minnu bɛ fɛn kɛrɛnkɛrɛnnenw walima kunnafoni kɛrɛnkɛrɛnnenw wajibiya.

1. Moule Pozitif kelen (Plug Assist/Forming/Bllowing): Aw bɛ a kɛ cogo min na.

O fɛɛrɛ bɛ plastiki sɛbɛn nɔgɔlenw dilan ka kɛ cogo kɛrɛnkɛrɛnnenw na ni masin fanga ye, minnu bɛnnen don fɛnw ma minnu cogoya nɔgɔmanw kurulen don walima minnu cogoya bɛ wuli.

2. Moule négatif kelen (Cavity Moulding):

O fɛɛrɛ in ni mɔbili ɲuman kelen tɛ kelen ye, a bɛ baara kɛ ni mɔli kurulenw ye, minnu fana bɛnnen don cogoya nɔgɔmanw ma nka u bɛ fɛn sɔgɔlenw dilan.

3. Set saba ka mɔli:

Fɛn dilanni fɛɛrɛ min ka gɛlɛn kosɛbɛ, o ye ka baara kɛ ni fɛn ɲumanw ye, fɛn juguw, fɛn minnu bɛ fɛnw siri, ani fɛn wɛrɛw minnu bɛ fɛnw siri, minnu bɛnnen don ka plastiki fɛn gɛlɛnw dilan.

4. Moule composite: 1. Bamako, Mali.

O fɛɛrɛ in bɛ se ka kɛ ka baara kɛ ni fɛn suguya caman ye ani ka fɛn dilannenw dilan walasa ka fɛn dilannen dɔ dilan min dilannen don ni fɛn dilannenw ye, a bɛ se ka kɛ ko a bɛ kɛ ni fɛnw ye minnu tɛ kelen ye walima ka fɛnw dilancogo fɛɛrɛw kɛ walasa ka baarakɛcogo kɛrɛnkɛrɛnnenw ni fɛn dilanni wajibiyalenw dafa.

III. Minɛnw ni ɲɔgɔn cɛ

1. Kɔrɔsili minɛnw:

A nafa ka bon kosɛbɛ walasa ka plastiki sɛbɛnw sabatili sabati funteni ni u dilanni senfɛ, ni sirilanw ye minnu bɛ kɛ karamɔgɔya cogo la ani minnu bɛ kɛ cogo tilalen na, olu ye suguya kunbabaw ye minnu bɛnnen don fɛn dilannenw hakɛ ni u cogoya wɛrɛw ma.

2. So funteniminɛnw:

A bɛ kɛ ka plastiki sɛbɛnw sumaya fo ka se u dilanni funteni bɛnnen ma, a ka c’a la, kuran tasumabɔlanw, kuran radiyatɛriw ani infirɛri sofaw bɛ sɔrɔ a la.

3. Vacuum minɛnw:

Termoforming waati, vacuum system bɛ plastiki sɛbɛnw dɛmɛ u ka bɛn nɔgɔ cogoyaw ma, o bɛ fɛnw wajibiya i n’a fɔ vacuum pɔnpew, fiɲɛbɔlanw, valvew, a ɲɔgɔnnaw.

4. Fiɲɛ min bɛ sɔgɔsɔgɔ:

Fiɲɛ min bɛ digidigi, o bɛ baara suguya caman kɛ funteni-sɛnɛ na, i n’a fɔ a bɛ dɛmɛ don ka fɛnw dilan, ka fɛnw bɔ u la ani ka u saniya.

5. Nɛnɛminɛnw:

Nɛnɛ ye fɛn dilanni taabolo yɔrɔba dɔ ye, min bɛ plastiki gɛlɛya teliya la, ka dilancogo cogoyaw mara, ani ka kɔnɔna degunw dɔgɔya.

6. Demolding minɛnw:

Demolding (Mɔgɔ bɔli) bɛ tali kɛ plastiki yɔrɔ dilannenw bɔcogo la ka bɔ mɔbiliw la, o bɛ se ka kɛ ni masin kɛrɛnkɛrɛnnenw ye, ka fiɲɛ bila, walima fɛɛrɛ wɛrɛw la walasa ka dɛmɛ don.

7. Kɔlɔsili minɛnw:

Kɔlɔsili siraw bɛ funteni-sɛnɛcogo bɛɛ baara tigitigi kɔlɔsi, i n’a fɔ funteni kɔlɔsili, waati, ani fiɲɛ min bɛ kɛ ni fɛnɲɛnamafagalan ye ani fiɲɛ min bɛ degun.

IV. Fɛnɲɛnɛmako jateminɛ nataw
Ni fɛɛrɛ kuraw bɛ senna ani ka ɲɛtaa sɔrɔ iziniw kɔnɔ, Fully Automatic Thermoforming Machine bɛna taa a fɛ ka yiriwa, ka yɔrɔ caman di ani ka jogoɲumanya sabati plastiki fɛnw dilanni na. Don nataw la, an bɛ se k’a jira ko an bɛna fɛn dilannenw ye minnu hakili ka di ani minnu bɛ baara kɛ ka ɲɛ, ka fara plastiki fɛnw kɛli kan minnu tɛ sigida lakana ani minnu bɛ baara kɛ kosɛbɛ. Fɛnɲɛnɛmafagalanw jɔyɔrɔba bɛna bonya ka taa a fɛ baara suguya caman na, ka na ni seko caman ye iziniw kɔnɔ.

Kuncɛli
Ni sɛgɛsɛgɛli ye danfara, minɛn minnu bɛ tali kɛ o la, ani yiriwali nataw la Plastiki thermoforming machine (Masini min bɛ thermoformer) kɛ, a jirala ko kalandenw ye faamuyali jugu sɔrɔ o fɛɛrɛ in kan. Ni fɛɛrɛ kuraw ni kokuradonni bɛ senna, thermoforming fɛɛrɛw ni minɛnw bɛna dɔ fara fɛn dilanni nafa kan, ka musakaw dɔgɔya, ka fɛn dilanni iziniw ɲɛtaa bila senkan.